food colloid mill
We provide customized solutions based on materials and actual working conditions.
The company has prototypes for you to experiment with. Welcome to send materials or visit our factory for guidance.
Inquiry
Food colloid mill
Food colloid mill
The refining and crushing link has always been the focus of the industry, which directly affects the quality of the finished product, Slusen The technical team combined a large number of experimental cases to develop colloid mills and wet grinders for the food industry. It has been well used by more than a dozen leading food manufacturers in my country. After comparing with purely imported equipment, they still chose us to become long-term partners.
Equipment principle
Food (colloid mill) fully absorbs the concepts of dry crushing and wet cutting in its structure, that is, it can crush slurry and some granular materials Processing, it can mix and crush dry and wet materials at the same time, use ultra-high linear speed to generate strong shear force, shear soft fiber materials, and the crushing effect is remarkable; second, use ultra-fine tooth gaps to control the materials to be crushed The fineness meets the requirements of ultra-fine crushing. The suction-type blades can ensure that the material is smoothly sucked in in the flowing state to complete the ultra-fine crushing process.
Effect comparison
|
item |
Slusen wet grinder (colloid mill) |
Ordinary colloid mill |
|
Crush effect |
■ By high-speed shearing, The cutting action completes the crushing instantly, the dispersion time is short, the fineness is confirmed according to customer requirements, and it has a certain self-suction force
■ After crushing, the particles have uniform fineness and narrow particle size distribution ■ The original particle size of the feed material is required to be lower |
■ Mainly grinding, supplemented by shearing, only a set of rotating and fixed grinding structures, and the grinding fineness can be adjusted by adjusting the gap of the fixed and rotating grinding mill
■ The fineness of the particles after dispersion is uneven and the particle size distribution is wide ■ The original particle size of the feed should not be too large |
|
Production Capacity |
Continuous production
Large production capacity |
Batch production
Small production capacity |
|
Energy consumption |
Low energy consumption | High energy consumption |
|
Crushing speed |
0~8000rpm
Line speed: ≤100m/s |
0~3000rpm
Line speed ：≤40m/s |
|
Temperature |
During the crushing process, the material is instantly refined, effectively reducing the heating process, and is suitable for various heat-sensitive materials | Repeated grinding during material processing will easily heat up and cannot effectively cool down. If the grinding disc gap is increased, the grinding fineness will be affected |
|
Modular |
Modular design meets various production requirements, facilitates automatic control, and is easy to maintain and operate | None |
|
Pumping force |
Have better pumping ability | There is a certain pumping capacity, most of which can only meet the discharging capacity and basically have no lift |
|
Clear |
Online installation, fully enclosed production , there is no cross-contamination between the material and the outside world, and it meets CIP cleaning requirements | Due to structural limitations, it cannot meet CIP cleaning requirements |
Onsite case
Selection table
Slusen has accumulated a large amount of test data and has prototypes for you to experiment with. Welcome to send materials and come to the factory for guidance and inspection. Mr. Zhang: 13861770816
The size of the batch, the formula, and the type of ingredients determine which machine in the Slusen series is suitable for you. The following is only a reference selection and customized services are provided.
50~500
|
Serial number |
Model |
Power (KW) |
Speed (RPM) |
Crushing capacity (kg/h) |
Material properties |
|
1 |
SSA-7 |
7.5/11 |
0~6000 |
Wet material |
|
|
2 |
SSA-15 |
15/18.5 |
0~4500 |
200~1000 |
Wet material |
|
3 |
SSA-30 |
30/37/45 |
0~4000 |
500~5000 |
Wet material |
|
4 |
SGS-7 |
7.5/11 |
0~6000 |
50~500 |
Wet material/dry wet material |
|
5 |
SGS- 15 |
15/18.5 |
0~4500 |
200~1000 |
Wet material/dry and wet material |
|
6 |
SGS-30 |
30/37/45 |
0~4000 |
500~5000 |
Wet material/dry wet material |
Partners
Customer testimonials
Contact us
Wuxi Slusen Automation Technology Co., Ltd.
Based on materials and actual working conditions, we provide customized solutions.
The company has prototypes for you to experiment with. Welcome to send us materials or come to us Factory tour guide.
Tel: Mr. Zhang 13861770816 (same number on WeChat)
Related Products
CONTACT US
-
-
+ 86 13861770816 Sales Hotline
-
