home > product > Online solid-liquid mixer

Titanium dioxide powder suction machine

+86 13861770816 （WeChat）

zhangmin@machine12.com

Inquiry

Product Details Technical Parameters

Titanium dioxide powder suction machine

Titanium dioxide powder suction machine

Titanium dioxide is an inorganic compound with the chemical formula TiO2. It is a white solid or powdery amphoteric oxide with a molecular weight of 79.866. It is non-toxic, has the best opacity and the best whiteness. And brightness, it is considered to be the best white pigment in the world today.

Titanium dioxide powder-liquid mixer solid-liquid mixing is a small system. The company will match the solution according to the materials and on-site working conditions. Mr. Zhang 13861770816

In actual large-scale production, there are two types: with shearing and without shearing. Different on-site working conditions match different equipment

Applicable to:

Titanium dioxide powder suction machine, nano titanium dioxide powder suction machine, titanium dioxide solid-liquid mixer, titanium dioxide powder-liquid mixer

Existing process

Traditional mixtureWill be prepared by:

•Liquid ingredients are weighed/ into processing vessels and subsequently heated to aid subsequent dissolution of the ingredients/Mixed.

• Powdered ingredients are added to the liquid and mixed until dispersed.

•Added stabilizers and emulsifiers. These can be pre-mixed with other ingredients to reduce clumping and frivolous powders incorporated into liquids.

There is a problem

Use a blender with traditional powder/liquid mixing system, this process will encounter many problems:

•These powders are highly cohesive and must be added at a controlled rate to reduce particle agglomeration.

•Pre-mixing of powders increases labor costs and processing time.

•Stabilizers and emulsifiers can clump easily , requires special treatment

•Poor dispersion will result. Partially mixed material accumulates on the walls of the heat exchanger, impairing heat transfer. font-size: 18px;”>•Incomplete mixing will reduce the yield of raw materials.

•Longer processing time is required to complete dispersion and achieve satisfactory uniformity.

•It is difficult to obtain the conversion rate of stabilizers using traditional methods

•Many recipes unnecessarily include high levels of these ingredients to compensate for poor yields and waste

Solution

The above problems can be overcome by using Sluson solid-liquid mixer.

How it works

The high-speed rotation of a special rotor is used to generate a vacuum, and the powder is evenly sucked into the working chamber. The high-speed rotation of a special rotor is used to generate a vacuum, and the powder is evenly sucked into the working chamber. It is evenly distributed in the fast-flowing liquid flow without producing large agglomerates:

Slusen solid-liquid mixing Six major changes brought about by the system

Selection table

Slusen has accumulated a large amount of test data and has prototypes for you. Welcome to send us materials and Mr. Zhang came to the factory for guidance and inspection: 13861770816

Batch size, recipe, type of ingredients determine which machine in the Slusen range is suitable For you, the following is only for reference selection and customized services are provided.

Model	Power (KW)	Flow rate (m³/h)	Powder-absorbing speed ( kg/min)
SZF-7	7.5/11	6-8	0-5
SZF-15	15/18.5/22	8-15	0-15
SZF-30	30/37/45	10-25	0-30
SZF-45	45/55/75	20-40	0-50

Workshop single machine finished product

Complete system

In actual mass production of powder-liquid mixing and solid-liquid mixing, in order to reduce labor and dust, many will use ton bags to load materials. The whole system is a set of systems, which must be customized according to actual working conditions. Plan. Mr. Zhang 13861770816

The picture below shows the customer on-site debugging of the solid-liquid mixing system customized by Sluson

Mixing Pump 2.jpg