Principle of powder liquid mixer
Product Introduction
solid Liquid mixeralso known asPowder suction emulsification pump,Powder mixer, also known as dispersion high shear disperser, dispersion of solid powder and liquid, Mixing processing (ingredients) is one of the most commonly used and important processing techniques in industrial production such as food, chemicals, coatings, inks, and daily chemicals, including different methods such as stirring, mixing, dispersion, dissolution, emulsification, homogenization, and homogenization. and means. Then in industrial production practice, a large number of different solids and liquids, different liquids and liquids, batch after batch, are quickly and stably Repeated processing to form a uniform and stable mixture is not a simple and easy task.
Solid-liquid mixing. Powder-liquid mixing is a small system, and solutions need to be matched according to materials and on-site working conditions. Manager Zhang 138-6177-0816
There are two types: with shear and without shear, different on-site working conditions match different equipment
Existing process
The traditional mixture will be prepared by:
•Weigh the liquid ingredients/Metered into processing vessels and subsequently heated to aid subsequent dissolution of ingredients/ Mix.
• Powdered ingredients are added to the liquid and mixed until dispersed.
•Added stabilizers and emulsifiers. These can be pre-mixed with other ingredients to reduce clumping and frivolous powders incorporated into liquids.
There is a problem
Use a blender with traditional powder/liquid mixing system, this process will encounter many problems:
•These powders are highly cohesive and must be added at a controlled rate to reduce particle agglomeration.
•Pre-mixing of powder will increase labor costs and Processing time.
•Stabilizers and emulsifiers can clump easily , requires special handling.
•Poor dispersion can lead to aggregation of partially mixed substances on the walls of the heat exchanger, thus impairing heat transfer.
•Incomplete mixing will reduce the yield of raw materials.
•Requires longer processing time to complete scattering and achieve satisfactory uniformity.
•It is difficult to obtain stabilizers using traditional methods Conversion rate.
•Many recipes include these unnecessarily High content of raw materials to compensate for poor yields and waste.
Solution
The above problems can be overcome by using Slusen solid-liquid mixer .
How it works
The high-speed rotation of a special rotor is used to generate a vacuum, and the powder is evenly sucked into the working chamber. The high-speed rotation of a special rotor is used to generate a vacuum, the powder is evenly sucked into the working chamber, and evenly distributed in the fast-flowing liquid. In the flow, no large agglomerates are produced:
Six major changes brought about by Sluson solid-liquid mixing system
Selection table
Slusen has accumulated a large amount of test data and has prototypes for you. Welcome to send materials and come to the factory for guidance and inspection. Manager Zhang: 138-6177-0816
The size of the batch, the formula, and the type of ingredients determine which machine in the Slusen series is suitable for you. The following is only a reference selection. , providing customized services
| Model | Power (KW) | Flow (m³/h) | Powder suction speed (kg/min) |
| SZF-7 | 7.5/11 | 6-8 | 0-5 |
| SZF-15 | 15/18.5/22 | 8-15 | 0-15 |
| SZF-30 | 30 /37/45 | 10-25 | 0-30 |
| SZF-45 | 45/55/75 | 20-40 | 0-50 |
Single-machine finished product in the workshop
Complete system
In actual large-scale production of powder-liquid mixing and solid-liquid mixing, in order to reduce labor and dust, many will use ton bags to load materials. The whole system is a system, and the specific plan must be customized according to the actual working conditions.Manager Zhang 138-6177-0816
The picture below shows the customer’s on-site debugging of the solid-liquid mixing system customized by Slusen
Partners
Contact us
We provide customized solutions based on materials and actual working conditions.
The company has prototypes for you to experiment with. You are welcome to send materials or visit the factory for guidance.
Tel: Manager Zhang 13861770816 (Same number as WeChat)
Related articles
- Application of silica suspension in polyester industry 2024-08-23
- How to choose rice refiner equipment 2024-08-23
- How to choose dispersion and grinding equipment for color paste 2024-08-23
- What is dispersion and factors affecting dispersion effect 2024-08-23
- Principle of powder liquid mixer 2024-08-23
- The principle and working process of pipeline emulsifier 2024-08-23
-
-
+ 86 13861770816 Sales Hotline
-
